Back to Course

ADI Part 2 – Driving

0% Complete
0/0 Steps
  1. Before Starting the Vehicle
    4 Topics
  2. Starting the Vehicle and Moving Away
    5 Topics
  3. MSPSGL Routine, Stopping and Junctions
    16 Topics
  4. Emergency Stop and Manoeuvres
    5 Topics
  5. Awareness, Vulnerable Road Users, Planning and Anticipation
    2 Topics
  6. Independent Driving
    2 Topics
  7. Show Me / Tell Me Questions
    1 Topic
  8. Trainer Notes & Reflective Log Upload Section: Part 2 Practical Sessions
    2 Topics
Lesson Progress
0% Complete

Older vehicles:

  • Use the choke if necessary
  • Place the key in the ignition switch and turn until the starter is operated
  • When the engine starts to run, release the key
  • Check all but the ‘Parking Brake’ warning lights have gone out
  • Press the accelerator slightly until running smoothly and then release
  • If any of the warning lights do not go out then switch off and investigate.

Modern keyless vehicles:

There are many variations of procedure when starting modern vehicles and you must read the vehicle manually in order to establish how to start yours.

Example

  • Key phob inside the vehicle
  • Press the clutch to the floor
  • Press the button or switch
  • The vehicle will start to run
  • Check all but the ‘Parking Brake’ warning lights have gone out
  • If any of the warning lights do not go out then switch off and investigate

Attempts for Clip 1

You’ve attempted this quiz 4 times, find your results below.

AttemptScoreStatus
Attempt 10/5Not attempted
Attempt 20/5Not attempted
Attempt 30/5Not attempted

Not happy with your results? Let’s improve them, together.

Unique course that teaches you the ins and outs of the hazard perception test.